This novel envelope generator provides a versatile alternative to other designs. It consists of two parts - the main AD/AR envelope generator itself and an auxiliary delayed pulse generator. The pulse generator output can be used as a trigger or gate to control the main envelope circuitry, or it may be used independently as an external timing/gating signal.
The circuit has four input modes and four output signals. Hence its name.
In the ordinary AD/AR mode the main input is used. It will take just about any signal you feed it. Driven by a trigger pulse, the unit's output is an attack-decay (AD) envelope. Driven by a gate its output is an attack-release (AR) envelope. And you can even use a continuous signal like an LFO for the gate.
Cycle mode: A pulse is generated at the end of the envelope decay/release and can be switched back to the input to produce a repetitive AD output signal.
Manual trigger mode: A momentary push button switch on the panel generates an input trigger pulse to generate an AD envelope.
The fourth operating mode employs input drive from the auxiliary delayed pulser. This circuit produces a delayed, fixed-width pulse, which may be switched to drives the EG circuitry. The pulse may be initiated by any signal with a positive-going 1.5 V crossing, for example, a trigger pulse or a waveform from an LFO, etc.
The four output signals are the main AD/AR envelope, the end of envelope (EOE) trigger, the delayed pulse and the end of pulse (EOP) trigger. The EOE trigger fires when the envelope falls to a value near zero. The EOP trigger fires at the end of the delayed pulse. These triggers are useful for feeding back to the unit itself and for external applications such as tandem operation of several units, etc.
The delayed pulser's output is available at the front panel, to use separately from or in conjunction with the EG itself. The delay time is retriggerable, ie if multiple triggers are received during the delay phase, the end of the delay phase is determined by the last received trigger. The pulse width phase is not retriggerable, ie a fixed pulse width always occurs.
This Module is available to buy as -
- A fully assembled module with 3.5mm sockets. (Eurorack 1/8" Standard)
- A fully assembled module with 4mm sockets. (Banana Jack)
- A full DIY kit, all parts and components to build your own 3.5mm sockets.
- A full DIY kit, all parts and components to build your own 4mm sockets
Contents: Panel, PCB/s, Components, Ribbon Cable, Screws
Build and Technical Information: Click Here
Elby Designs IF114 4x4 AD/AR Envelope Generator DIY KIT Eurorack Synthesizer
With Tracking 7-14 Business Days (Estimated)
Sales & Taxes.
The sale price listed is AUD (Australian Dollar), and is the final price to pay.
Credit Card (Visa, Mastercard, Amex), PayPal.
1-Year warranty against defects, and manufacturing faults. (Click for more)
This module is available to buy with 3.5mm (1/8" Jack) sockets or 4mm (Banana Jack) sockets.