The ES02 combines two functions in to a single module:-
- Preamplifier - for scaling external audio signals to EuroSynth audio levels
- Envelope Detector - also known as an Envelope Follower and which extract amplitude information from complex audio waveforms. The resulting dc voltage often drives non-linear stages, such as voltage-controlled amplifiers or filters.
The Serge Preamp and (new) Envelope Detector provide an exceptionally responsive link between external audio signals and the EuroSerge synthesizer modules. The key to this responsivity comes from the fact that the detector was designed to respond to the POWER rather than to the AMPLITUDE of a sound. Human perception of loudness is proportional to the POWER content of a wave, rather than to its AMPLITUDE.
Detecting the AMPLITUDE of a signal produces an inaccurate envelope, sometimes too soft, and most of the time too loud. The ES02 detector is exceptionally accurate and outputs a control voltage envelope that is directly proportional to the perceived loudness of an input signal. It operates over a very wide dynamic range, in excess of 70db, (or the difference between a whisper and a subway train at 15 feet!). The output is accurately log-linear at 12db/V, a taper which mates perfectly with the control characteristics of the ES78 VCA. Thus it is possible, for example, to control the loudness of a synthesizer sound by the sound envelope of a locomotive, a dog barking, or a voice going from a whisper to a shout. The effect is especially remarkable because of the accuracy of response: the whisper is really a whisper, and the shout a shout.
The Preamplifier accepts a wide variety of inputs:-
- Lo-Z In - accepts outputs from high-output microphones in the range 200 to 1000 Ohms (such as most electret microphones), with a sensitivity suited for close-miking applications such as instrument or voice pick-up.
- Hi-Z In - accepts outputs from transducers such as guitar pickups and contact microphones. It is also suited for amplifying low-level signals from tape machines, tuners etc.
- On the 3.5mm variant the [OUT] output of the preamplifier is normalised to the [IN] input of the Detector allowing access to both output signals without patching.
- Sensitivity for various microphones and audio sources can be adjusted over a very wide range using the Preamp's [GAIN] control (but note, it will not cut the gain to zero).
This Module is available to buy as -
- A fully assembled module with 3.5mm sockets. (Eurorack 1/8" Standard)
- A fully assembled module with 4mm sockets. (Banana Jack)
- A full DIY kit, all parts and components to build your own 3.5mm sockets.
- A full DIY kit, all parts and components to build your own 4mm sockets
Contents: Module, Ribbon Cable, Screws
Build and Technical Information: Click Here
Elby Designs Serge ES02 Preamp Detector Eurorack Synthesizer Module
With Tracking 7-14 Business Days (Estimated)
Sales & Taxes.
The sale price listed is AUD (Australian Dollar), and is the final price to pay.
Credit Card (Visa, Mastercard, Amex), PayPal.
1-Year warranty against defects, and manufacturing faults. (Click for more)
This module is available to buy with 3.5mm (1/8" Jack) sockets or 4mm (Banana Jack) sockets.