The ES75 is an adaptation of the Dual Universal Slope Generator with a few new features.
The ES75 is a unity gain voltage follower. The rising and falling slopes are independently and jointly voltage controllable over a wide range.
VC Transient Envelope Generator
A pulse at the trigger input will start the envelope, or a gate input will sustain the level and the envelope will fall when the gate goes low. Rise and fall are independently and jointly voltage controllable, with variable linear and exponential wave shapes.
Voltage is slewed according to the rise and fall times.
When the cycle switch is thrown, the trigger input is connected internally to the end trigger output, creating a VC clock with variable waveform and independent rise and fall times.
While not as wide ranged, or accurate as a dedicated oscillator module, the VCS is still an excellent audio source. The [EXP CV] input is scaled approximately to the 1V/Octave standard. The Output wave can be swept from triangle to saw with linear and non-linear waveforms. [END OUT] also produces a pulse waveform.
VC Non-Linear Audio Processor (Low-Pass Gate)
If an audio rate signal is slewed, the module responds like a VCF, and a rough VCA. The signal is low-pass filtered down to silence, similar to a low-pass gate.
Positive and negative peak detection envelope follower.
VC Pulse Delay
Trigger input starts the envelope and a trigger will be produced again at the End Out when the envelope completes its cycle.
If a series of triggers are applied to the VCS faster than the total rise and fall times, the module will divide the incoming signal by a whole number. In the audio range the output will be the sub-harmonic series.
This Module is available to buy as -
- A fully assembled module with 3.5mm sockets. (Eurorack 1/8" Standard)
- A fully assembled module with 4mm sockets. (Banana Jack)
- A full DIY kit, all parts and components to build your own 3.5mm sockets.
- A full DIY kit, all parts and components to build your own 4mm sockets
Contents: Panel, PCB/s, Components, Ribbon Cable, Screws
Build and Technical Information: Click Here
Elby Designs Serge ES75 Voltage Controlled Slope DIY KIT Eurorack Synthesizer
With Tracking 7-14 Business Days (Estimated)
Sales & Taxes.
The sale price listed is AUD (Australian Dollar), and is the final price to pay.
Credit Card (Visa, Mastercard, Amex), PayPal.
1-Year warranty against defects, and manufacturing faults. (Click for more)
This module is available to buy with 3.5mm (1/8" Jack) sockets or 4mm (Banana Jack) sockets.